Regulator Clocks

Regulator Clocks

Terms and Conditions for Lawsons Conditions of Sale 1. Auctioneer is Agent for Vendor Lawsons is agent for the Vendor and is not responsible for any default by the Vendor or the Buyer. Highest Bidder Subject to any reserve price, the highest bidder shall be the Buyer and a dispute shall be settled by the Auctioneer who may at any time at his absolute discretion and regardless of the fall of the hammer re-open the bidding or withdraw the Lot from sale. The decision of the Auctioneer shall be final. Regulation of Bidding The Auctioneer has the right in his absolute discretion to refuse any bid and to advance and regulate the bidding as he decides and any bid acknowledged and relied upon by the Auctioneer may not be with drawn. Rights of Auctioneer and Vendor The Auctioneer and the Vendor reserve the following rights which may be exercised by the Auctioneer without giving any reason therefore: Buyer Bids as Principal Every Buyer shall be deemed to bid as principal unless prior to the auction he discloses to Lawsons that he will be bidding on behalf of a principal and supplies the full name and address of his principal and a copy of a written authority to bid for and on behalf of that principal and such authority is satisfactory to Lawsons. Proof of identity acceptable to Lawsons may be required prior to entry to the auction premises.

Beautiful Friedrich Mauthe Clock: Outstanding Condtion!

This is because there are different types of clocks and some can have more than one winding point. Most clocks will have one, two, or three winding points. Some clocks are wound using a key or crank, while others are wound by pulling on a chain. Although there are many different kinds of clocks, they can be broken down into several different categories according to how they are wound. This tutorial will explain how to wind the following clocks: When there is only one winding point, the movement will only have one set of gears.

Mauthe started as a general supplier for clockmakers tools and equipment and accepted clocks on a barter system. As the demand for clocks grew, Mauthe .

American made gilt metal mantel clock patterned after French Rococo clocks. Eight day movement with Produced in the ‘s, this clock is This stout longcase Grandfather clock dates to the art deco period. Beautiful walnut cabinet with dark burnished edges. Here is a very minimalist German 2 weight wall clock. It dates to Very rare speakers from the early ‘s. Produced in Califoria by Design Acoustics, the model They date from the years before Stunning mahogany cabinet with exposed wooden Arthur Pequegnat was a Swiss immigrant to Canada

Vienna Styles

June 19, Author: Their wall clocks often looked like models made by Seth Thomas but some of their designs were unique. The regulator 1 is often compared to the Seth Thomas Regulator 2. There were many thousands of the ST Regulator 2s that found their way into offices and rail stations all across America. The Arthur Pequegnat Regulator 1, though not as prolific, served the needs of many businesses in Canada. Their clocks are highly collectible in Canada and command twice the price of similarly styled clocks by well-known American counterparts.

Clock MAUTHE W 45/XXVI. Remove this product from my favorite’s list. Add this product to my list of favorites.

Bill Hi Wayne, Thank you for sharing this clocks with us. I always love to hear a clock with Westminster chimes ringing every quarter-hour. I believe your clock was manufactured in Germany somewhere in the ’30’s or ’40’s. Going by your description of the trademark on the movement, it was probably made by the Kienzle Clock Company. During the time it was made, Kienzle made many types of clocks to export to the U. Not all clocks had the company name printed on the dial – this was even true of the American clock companies.

This fact makes it harder to identify antique clocks today. But the trademark of a clock dial with wings on either side is one of Kienzle’s. The word Foreign on the dial was required on any clock from outside the U. I’m not sure of the dates when that was required.

How To Adjust An Antique Clock

Rasch has allowed me to use copies of his representations of the various styles. The line drawings used on this page are copywrited by Dr. For more information contact Dr. Rasch using this link: Link to SN Clocks Although we consider the Vienna regulator a form of art, clock making was a business and the clocks had to fit into the furniture style popular at the time of manufacture. Also keep in mind that there were many wars during the 19th century in Europe.

Vintage Friedrich Mauthe Divina Gong Wall Clock. Item Details. A vintage mahogany Friedrich Mauthe Divina Gong wall clock, circa s. The clock has a curved and split pediment with a small carved, applied foliate detail to the top. The face is white with a brass-toned band and black Arabic numerals and simple hands.

Antique Mantel Clocks Set Up And Care General Set Up Information Antique mantel clocks have their own unique little personalities and you will slowly learn how often your antique mantel clock likes to be wound and how picky it is about where it is placed. First of all setting up your collectible antique mantel clock starts with where you decide to place it. Cardinal Rules 1-It’s ok to move the hour hand gently and if it is hard to move stop to set time or correct bell ring on your antique mantel clock but NEVER move the minute hand other than clockwise.

Moving it counter-clockwise will damage your antique mantel clock’s mechanism. Another method of setting the correct bell chime is to move the minute hand to the 11 and then back to the 9 until the clock strikes properly. Generally to set time only use the minute hand, stopping slowly just before the hour and half hour of your antique mantel clock, giving the bell a chance to set up. Remove the pendulum first. Set Up Your most important tool will be a small, inexpensive pocket level.

With this you will need to make sure that wherever you position your antique mantel clock, that the surface is very level, especially from left to right. The swing of the pendulum inside the clock which hangs down and swings from right to left will be affected if the clock is not level. The front to back level should also be reasonably level because you do not want the pendulum resting on the bell or back wall or it will not run.

These clocks were typically placed on top of a fireplace mantel which is where the name mantel clock comes from.

Arthur Pequegnat Regulator #1

The Fallacy of the “Maker’s Mark” Before sending an item to be assayed and hallmarked at a British assay office a person must first register their details with the assay office they want to use. The reason for this is pretty obvious – the assay office needs to know who to charge for their services, where to return the items, and who to hold responsible and punish if an item is found to be sub-standard, which in earlier times included sentence to the pillory.

This person is called the “sponsor”, which in this context means the person who takes responsibility for the items submitted.

45mm, the clocks could enter the USA as a watch as opposed to a clock, thereby attracting a lower rate to import duty. Most models use exactly the same gears in the standard and standard narrow versions. Edgar Henn cunningly produced a narrow movement with two Created Date: 10/12/ AM.

People have to keep in mind that antique clocks are often hundreds of years old. Each antique clock was made by hand without using electric tools and without the aid of computerized machines. Today, modern mechanical clocks are manufactured with machines that can cut gears with incredible precision. In contrast, antique gears were cut using hand tools and often took many hours to make.

With that being said, an antique clock that is accurate to within a couple minutes per week really needs no adjusting. Unless you are a clock expert, accuracy greater than that is difficult to attain. If you want that kind of accuracy, I suggest you let an expert perform an overhaul. Every time your clock pendulum makes a complete swing back and forth, two teeth on the escape wheel are released and the minute hand advances – ultimately one sixtieth of a minute.

The faster the pendulum swings, the faster the minute hand will turn. A basic principle of physics is that the length of a pendulum will determine how fast it swings. A shorter pendulum swings faster than a longer pendulum. You can change the effective length of a pendulum by either rising, or lowering, the pendulum bob.

Sponsor’s Marks

If this item contains incorrect or inappropriate information please contact us here to flag it for review. Beautiful Friedrich Mauthe Clock: As the demand for clocks grew, Mauthe started his own manufacturing enterprise in His sons Christian and Jacob joined the family enterprise in

Victorian Gothic Antique Cast Iron Clock, Hand Painted, Pearl Inlay # $ Sold. Victorian Antique Cherry Mantel Clock, Signed Gilbert #

It is similar to, but smaller than the H Key H-4 also fits many mantel, bracket, shelf, and wall clocks by: It is similar to, but larger than the H Not sure whether to order an H-4 or an H-8 key? For repair information for mantel, bracket, and shelf clocks of the above and other brand names, click HERE. For repair information for wall clocks of the above and other brand names, click HERE.

This key also fits other American-made, antique, and vintage Chelsea clocks including antique Chelsea deck clocks, phenolic case, etc. If you have a Chelsea clock that has the American-made mechanism that’s manufactured in Chelsea, Massachusetts USA, then this is the genuine key for your clock. It is also a new replacement key for most other modern grandfather clock with mechanisms by Franz Hermle, Hermle Black Forest, Kieninger, and Urgos.

Mauthe Alarm Clock Repetition



Hello! Do you want find a partner for sex? Nothing is more simple! Click here, registration is free!